Send til en ven   Udskriv16/11 2009 kl. 14:52
Send til en ven

Lattice lancerer nye ECP3 FPGA'er

De nye LatticeECP3-150 FPGA'er er bl.a. ideelle til højvolumen, low-cost 3G basestationer (in english). 

Lattice Semiconductor announces that the LatticeECP3-150 FPGA, the highest-density device in its high-value, low-power ECP3 mid-range FPGA family, has been fully qualified and released to volume production. 

The ECP3-150 device features a DSP capacity of 320 18x18 multipliers, 6.8 Mbits of memory and up to sixteen 3.2Gbps SERDES channels, making it ideally suited for highly complex and integrated Wireless Remote Radio Heads (RRH) such as MIMO-based RF antenna solutions. 

The ECP3-150 FPGA also provides Wireline Access developers with unprecedented high-density, low-cost, low-power Ethernet, SONET and PCI Express solutions, with the lowest cost points and power footprints in the FPGA industry. 
- With the production release of our ECP3-150 device, our customers can implement even more complex designs for wireless and wireline access and still benefit from the device’s low power and economy, says Shakeel Peera, Lattice Marketing Director for SRA

M FPGAs. 

A range of intellectual property (IP) cores, including Crest Factor Reduction (CFR), Digital Pre-Distortion (DPD), CPRI, OBSAI, Serial RapidIO, XAUI, SGMII/Gigabit Ethernet, PCI Express, SMPTE for serial connectivity, FIR filters, FFT, Reed-Solomon encoders/decoders, CORDIC, CIC, NCO for DSP functions and several others for memory interfaces and connectivity, are available from Lattice and its partners to enable customers to develop time-to-market solutions. 

About the LatticeECP3 FPGA family

The LatticeECP3 FPGA family is comprised of five devices that offer standards-compliant multi-protocol 3G SERDES, DDR1/2/3 memory interfaces for low cost FPGAs and high performance, cascadable DSP slices that are ideal for high performance RF, baseband and image signal processing.  Toggling at 1Gbps, the LatticeECP3 FPGAs also feature the fastest LVDS I/O available in a mid-range FPGA family, as well as embedded memory of up to 6.8 Mbits.  Logic density varies from 17K LUTs to 149K LUTs with up to 586 user I/O.  

The LatticeECP3 FPGA family is ideally suited for deployment in high volume cost- and power-sensitive wireless infrastructure and wireline access equipment, as well as video and imaging, applications.  For more information about the LatticeECP3 FPGA family:
http://www.latticesemi.com/products/fpga/ecp3

Relaterede nyheder

Forrige123456Næste

Elektronik & Data • Odsgard A/S • Stationsparken 25 • 2600 Glostrup • Tlf: +45 4345 1063